Products => Lubricants
 Special Lubricants 

Here we offer special lubricants and additives to cope with vehicles, weapons and equipment we offer.

Our areas of expertise cover:

  • Weapon lubrication and conservation
  • ballistical lubricants
  • Corrosion inhibitors, oils and waxes
  • Hydraulic fluids

Our preferred choice for 100% Automatic Lockers (KAISER, PowerTrax LockRight, Detroit Locker a.s.o.)

ADDINOL Axle and Gearbox Oil GH 75W-140 is a German high performance lubricant based on fully synthetic oils plus additives.


Perfectly suited for highly loaded hypoid differential gears, especially when equipped with 100% automatic locking differentials. This oil has the lockers operate more smoothly and reduces operational sounds generated by those lockers.
Also suited for manual gearboxes and transfer cases, especially when prolonged stationary usage with PTOs is intended.
Also very good at changing climate conditions.

Fulfills requirements according:

Scania STO 1:0
MIL-L-2105 D/E
Please check manufacturer's information or ask us!


85,-EUR net / 20l

As official ADDINOL partner it's our pleasure to help you find your optimal product.

On this behalf we also have full support from ADDINOL and the ADDINOL laboraty - please ask for a quotation!

 Ballistical DryLube 
Molybdenum disulfide (MoS2) - ultra-pure and micro-fine

Molybdenum disulfide (MoS2) is a dry-lubricant with high temperature resistivity. Applied to bullets and cartridges it improves ballisitical performance along with reduced wear of chamber and barrel.

MoS2 forms out a dry, slicky layer on bullet, cartridge and barrel. When complete cartridges are being coated removal of the fired cartridge is also being lightened. Bullet velocity is improved as well as ballistical performace data. Your gun's precision will get better.

We offer ultra-pure MoS2 powder. This powder has been ground to an ultgra small grain size of 3-5µm. The powder is stable up to 450°C in air environment.

To coat bullets we recommend an appropriate tumbler. 1000 bullets will require just a few grams of MoS2-powder. Ease of use provides the MoS2-spraycan that also can be used for coating larger areas.

Avialbale as spray can 400ml and cans of 10g, 100g, 1kg and 5kg.

 Spray 400ml38,80EUR net.
 Can 10g15,-EUR net.
 Can 100g38,-EUR net.
 Can 1kg240,-EUR net.
 Can 5kg785,-EUR net.
Stage 1:
NATO Weapon Cleaning and Lubrication Oil W-18

For your daily cleaning, maintenance and protection we suggest using the NATO approved, fully synthetical weapon oil W-18.

It consists of a blend of fully synthetic oils and carbohydrates plus zinc and phosporous compounds that both clean, lubricate and protect your weapon. After evaporation of VOCs a waxy, closed protection film remains giving your weapon protection of 2-4 weeks when stored inside.

This oil is tested for protection against 900hrs damp, warm storage, 100hrs salt spray and residues of propellant. You can find the NATO specification HERE.

Prior shooting a cleaning of barrel and chamber ain't necessary but, should be done to improve first-shot precision.

This weapon cleaning oil is NATO-approved under No. S-671 and BW-OY-1045.

Availabe als spray (150ml) or fluid (100ml, 1l, 5l, 20l).

 Spray 150ml7,-EUR net.
 Bottle 100ml5,50 EUR net.
 Can 1l18,50EUR net.
 Can 5l65,-EUR net.
 Can 20l220,-EUR net.
Stage 2:
Medium-Term Protection Oil KO6-F

When storing weapons over short or medium term our first choice is the Corrosion-Inhibitor oil KO6-F.

This product is a corrosion inhibitant oil with special additives. After evaporation of VOCs a waxy, closed protection film remains giving your weapon protection of 4 weeks up to 6 months when stored inside. Water and rust are being repelled from metal surfaces and even salty sweat from your hands is being neutralized.

Prior shooting chamber and barrel need to be cleaned.

Availabe als spray (500ml) or fluid (20l).

 Spray 500ml9,50EUR net.
 Can 20l175,-EUR net.
Stage 3:
Heavy-Duty Corrosion Inhibitor and Lubricant LPS3

Heavy Duty Aircraft approved Corrosion Inhibitor and Lubricant for multi-year protection of metal (internal and external)

We recommend LPS3 for treatment of wepaons for extended periods of storage under harsh conditions. LPS3 will protect and lubricate bolts, barrels, and else with a flexible film for years! No chance for rust and water - especially recommended for storage longer than 6 months - lasts up to 5 years!

  • Stops exfoliation of filiform corrosion of aluminum and steel
  • Stops rust and corrosion; protects blank for a minimum of 2 years outdoor! 5 years indoor!
  • Penetrates to displace moisture and protect even smallest chinks
  • Resists moisture, sand, dirt, dust and vibration
  • Does not contain chlorinated solvents or silicone
  • Nonconductive
  • Nonstaining
  • Remains flexible over time
  • Lubricant for mechanical parts
  • Easily removed with LPS degreasers
  • Safe on most surfaces including rubber, plastics and paint
  • No heating required for application!

Conforms to following standards:

  • MIL-PRF-16173E Grade 2, ASTM F-945, PWA 36604
  • BMS 3-23 G Type II, TN A.007.10138 Type 1 Grade 2
  • DMS 2150
  • NSF Registered H2 (Aerosol #129027, Bulk #059848)

Available as 380ml spray can and larger bucks. Commercial use only! Remove completely prior shooting!

 Spray 380ml (sold as 12-pack, only)20,50EUR net.
 Can 3,78l / 1 gal158,10EUR net.

LSD additive

Improves operation of friction-type LSDs. Can be used together with standard gearbox oil usually not suited for LSDs - usually such oil will render your locker useless.

Simly add 2% of the additive to regain your locking capability. Comes in bottles of 100ml for 2l of gear oil suitable for 1 axle up to 5% addon.

Note: worn out or broken LSDs cannot be restored with this additive!

16,50EUR net. / 100ml
Used engine or gearbox oil is a dangerous substance. The user is required to treat and dispose this substance as required by regulations. We accept the amount of delivered oil for correct disposal if sent free of charge to us.

Orders, questions and comments please via Mail.