Products => Special-Duty Vehicle => Custom Products
Custom Design Parts
 All Custom Parts are copyrighted and protected in design by law.
Airline Alu Floor System

Our Airline Alu-System Floor offers unparalleled flexibility in vehicle configuration and usage. Starting from service trucks up to mini buses with variable seating everything is possible!


  • Modular aluminium system floor with 8 standard rails
  • Simply click in single and double rail profiles to realize almost any vehicle floor layout
  • TÜV - tested
    modularer Alusystemboden, 8 verschiedene Elementvarianten lieferbar
  • durch Verklicken von Einzel- und Doppelprofilen ist nahezu jedes Fahrzeugboden - Layout umsetzbar
  • TÜV-geprüft mit Gutachten auch für Sitze


  • Single or double Airline profiles
  • Various spacer profiles and covers
  • Comes complete with mounting instructions and TÜV certificate
  • Approved seating systems for Aitrline available!
  • Tables and other interirior avilable!

Anwendung und Vorteile

  • All common van types
  • Disabled transport vehicles
  • Special vehicles
  • Motorhomes
  • Most flexible method of implementation, fast installation
  • No special tools required for installation and setup
  • Isocyanate-free adhesive (no harmful vapours)
  • Rail profi les screwed only at each end (therefore no other work on vehicle under
    body required, such as removing fuel tank, etc.)
  • Can be covered with carpet, wood, rubber or vinyl flooring
  • Low height and weight
Modular Roof Rack System

We are more than proud to present our modular Roof Rack System:

Technical Data:

  • Module Size 750x1000mm or 750x1200mm
  • Expandable in steps of 750mm
  • Capacity: 100kg per module (depends on vehicle!)
  • Fixture and tie-down rails all-side (inside, outside, top and side)
  • Tie down rails also integrated in base plate
  • base plate stainless steel, hole punched (closed available)
  • material stainless steel INOX, 1.4301-grade
  • Fixture universal and vehicle-specific available (e.g. J6)

A picture of the system on a vehicle is available HERE


Front Winch Bumper

Custom front winch bumpers & carrier systems, e.g. for the HJ60/61 or FJ62.

Features and Options (Selection):

  • Individual configurable Front Carrier System
  • Material: Steel zinc-plated, Aluminum, INOX
  • The bumper can handle even very large winches
  • front frame extension
  • Hi-Lift (or similar) receptacles
  • 10ton-rated (double safety!) dual towing anchors
  • 2ton-rated (triple safety!) O-bolt for additional purposes
  • Checkerplate footsteps right and left for best engine maintenance
  • Greasable massive roller fairlead
  • branch deflectors
  • Hydraulic Couplings
  • Power Socket System
  • Optional fairlead fairing
  • and so on...

Options: e.g. removable Lightbar and Bullbar:

Custom designed, available for every vehicle including qualification for legal use. All kinds of modifications possible!


Rear Bumper System

Custom rear bumper & carrier system, e.g. for th HJ60/61 or FJ62

Features and Options (Selection):

  • Hi-Lift (or similar) double receptacles
  • 10ton-rated (double safety!) dual towing anchors
  • Large checcerplate footsteps right and left
  • Material: Steel, Aluminum, INOX
  • 60W back-up-light or working illumination (12 or 24V)
  • rear fog light
  • Hidden trailer socket
  • Hydraulic Couplings
  • Power Socket System
  • Options: modular carrier system capable of 100kgs of load

Custom designed, available for every vehicle. All kinds of modifications possible!

Rear Modular Carrier

Modular Universal Pivot Rear Carrier System

Features and Options (Selection):

  • modular system, multi-purpose, expandable
  • Carrier length / Swing Arm up to 1800mm
  • Max. load 150kg for Offroad Use (only depending on vehicle)
  • Universal Carreir System - all options simple attached to Swing Arm and bolted in place - takes only one minute!
  • depending on vehicle up to 22 standard units (TEs - 75mm per TE) usable length
  • Hinge mounting either bolt-on or welding
  • Hinge greasable, massive brass pivotbearing
  • all parts zinced, 5 years warranty against rust
  • Locker double secured
  • Locker takes carried load to relieve hinge

  • Gas Spring with end damping - lockable per request
  • Material: Carrier 5mm massive steel, Options 3-5mm Steel
  • Hinge 10mm
  • Hinge center pin 50mm Steel
  • Complete Carrier assy' to be removed from vehicle in less than 5 minutes

Options (Selection):

  • Spare tire carrier (maximum dia 90cm - more per request) - 6TE
  • Bicycle holder - three bikes max.
  • Jerry Can Holder 20l single - 6TE
  • Jerry Can Holder 20l single / dual / triple can - 7TE
  • Antenna mount universal, maximum whip weight 20kg - 1TE
  • HiLift carrier 2 + 1TE, can be combined with other carriers
  • Step - 2TE
  • Genset universal Carrier up to 100kg - 8TE
  • Universal Carrier up to 50kg - 8TE
  • License Plate Holder - 6TE
  • Battery box 24V12Ah+12V/24Ah 2TE
  • Tank assembly up to 80l of fuel or water
  • Storage Box fibreglass 240l
  • Rooftop Ladder
  • quad Bicycle carrier up to 60kg net weight
  • lighting sets, 200 to 600 watts, 12, 24 and 230 volts
  • Motobike carrier, up to 150kg.

Single Jerry Can Carrier

Multi-Carrier Aluminum for one, two or three Jerry Cans

Carrier Box, watertight

Genset Carrier


individual Skidplates

Custom designed Skidplates

Example: toyota J4-Series



Features and Options:

  • Steel, Aluminum or INOX
  • Maintenance and Service openings or lids
  • Machinery mounting
  • Single- or multiple pieces

Auxiliary Fuel Tank 90l with Skidplate

Example Price: 980,-EUR net.

Auxiliary tank with 90l capacity, CE-approved. Comes complete with carrier, mounts and skidplate. Fits at spare wheels compartment.


  • Capacity: 90l net
  • For diesel and vegetable oil
  • Plastic tank with feed and return line, filler line and fuel gauge sending unit preparation
  • Replaces 205R16 spare wheel (rectangular)
  • including mounts - requires spare tire carrier to be converted (included)
  • comes with skidplate, 3mm steel, zinced, single replacable
  • One-man mountable
  • including sending unit and gauge

Auch für andere Fahrzeuge lieferbar!


Winch Fairing 'total protection'

Example Price: 118,- net. EUR

This is an example for a custom winch fairing to provide complete protection against water and dirt of a total winch including winch body, motor, control box and 'heavy duty' roller fairlead, done in signal orange colour:



Some of the Details:

  • Custom design to give full protection
  • durable truck blanket material
  • many colours available
  • stitched and welded
  • with rubber straps
  • designed to completely fulfill your requirements

We can offer products like this for any kind of vehicle, winch or other accessories. Made in approx. one day, vehicle is needed!



This is just a small overview.

What we can offer covers (amongst others):

  • Custom bumpers and skids matching your requirements in Aluminum and steel
  • fuel tanks and accessories incl. mounting and protection equipment for Diesel or vegetable oil
  • Power-Take-Offs (PTOs)
  • winches front, rear and hidden central mounted, electrical or hydraulic
  • hydraulic power installations including pumps, solenoids, cylinders, motors and tanks

Just ask!


Orders, questions and comments please via Mail.